Description:
UV Light Cure Glue Strong Bonding UV Light Cure Adhesive is suitable for metal,
plastic, rubber, glass and concrete.
Specification:
| Size | 5.5cm x 2.5cm x 16cm/2.2'' x 1'' x 6.3'' |
| Capacity | 50ml |
| Adhesive Color | Colorless |
| Viscosity | 1000-15000 |
| Hardness | 55 (GB / T 531-1999 cured test) |
| Quality guarantee period | Valid for one year |
| Suitable for | metal, plastic, rubber, glass and concrete |
| Positioning time | ≤5s -125W PHILIPS high-voltage fluorescent lamps, 4.5 mW / cm2 UVA 2mm thick glass / glass |
| Typical cured properties | Tensile shear strength (GB 7124-86) overlapped area of 25 × 12.5 = 312.5mm 2: glass / stainless steel, ≥8MPa, 30°C |
Features:
● Superior bond strength.
● Convenient and easy to use.
● Adhesive for households.
● This glue is a UV or visible light curing modified acrylate adhesive with strong bonding,
transparent color, moderate viscosity, operational characteristics of the lamp.
● For metal and glass, glass and glass, glass and ceramics, glass and wood, glass and
crystal bonding and so on. For example: art glass, glass wash basin, glass furniture,
glass products, glass case like bonding.
Steps for usage:
1. Depending on the material surface treatment, surface dry and clean, no weak boundary layer;
2. The interface bonding glue on the need for continuous coating material, be careful not to disperse;
3. Positioning the illumination lamp ultraviolet curable glue into short radiation, until light hand could not move;
4. Remove the excess glue will overflow glue scraping with a knife, or a soft cloth, paper towel, gently
erase excess glue to be dipped in acetone, alcohol wipe;
5. Completely curing time high radiation, until fully cured, do not pay attention to the temperature is too high;
6. Cleaning materials with a soft cloth or paper towel dipped in acetone, alcohol and gently wipe the bonding
material good.
Instructions for use:
1. the adhesive surface clean, dry and free of grease can be wiped with acetone, hair dryer.
2. ultraviolet light positioning curing, curing rate depends on the glue to absorb light energy, associated with
the light from the light transmittance material and other factors.
3. the operation should not be unduly squeeze adherend can not be repeatedly moved and separated from
the adherend.
4. using the remaining glue can not rewind the original packaging to avoid contamination.
Precautions:
Avoid contact with eyes, skin and clothing. This pair of eyes and a slight skin irritation. If accidentally splashed
into the eyes, rinse immediately with plenty of water, as there does not need to go to hospital. Rinse immediately
with soapand water after skin contact. Clean clothes can be worn after the contact. Do not allow contact with children.
Storage:
This product is sensitive to light and heat, you need to store in a cool, dry place, away from light below 28 ℃,
Package Included:
1 x 50g K-3181 Adhesive
Notice:
1. Please allow 1-3mm error due to manual measurement.Pls make sure you do not mind before you bid.
2.The color may have different as the difference display,pls understand.
