Specification:
Color: Colorful
Material: Plastic + Electronic component
Highest real-time sampling rate: 1Msps
Accuracy: 12Bit
Sample buffer depth: 1024 bytes
Analog bandwidth: 0 - 200KHz
Vertical sensitivity: 5mV/Div – 20V/Div (progressive by 1-2-5)
Input impedance: 1MΩ
Maximum input voltage: 50Vpp (1:1 probe), 400Vpp (10:1 probe)
The coupling method includes: DC/AC/GND
Horizontal time base range: 10μs/Div – 50s/Div (progressive by 1-2-5)
Size: (L)X(W)X(H) 103X75X23mm /4.06''X2.95''0.91"(appr.)
Function:
1. Can be triggered by a rise or drop edge.
2. Comes with 1KHz / 3.3V square wave test signal source.
3. Vertical displacement is adjustable and with instructions.
4. Observe the waveform before the trigger (negative delay).
5. The trigger level position is adjustable and with instructions.
6. The waveform display can be frozen at any time (HOLD function).
7. Save/tune out the waveform, the shutdown waveform does not disappear.
8. Automatic, regular and single trigger mode for easy capture of instantaneous waveforms.
9. With waveform parameter digital display, the parameters that can be displayed are: frequency, period, pulse width, duty ratio, maximum value, minimum value, average value, peak value, effective value.
Features:
● Fully assembled, be patient.
● Higher sensitivity, good performance.
● 2.4-inch color TFT LCD with 320 x 240 resolution.
● Rotary coding switch is adopted to make parameter adjustment more convenient.
● An oscilloscope has a complete enclosure with separate panels and upper and lower baffles for user modification.
ATTENTION:
The oscilloscope uses a 9V DC power supply (the power supply voltage must not exceed 10V! Otherwise it may burn out the machine). The kit itself does not contain power, users need to prepare their own power supply, the power supply current should be able to provide more than 200mA
Package Included:
1 Set Digital Oscilloscope DIY Kit
